• 

  MS741 Master Station

  The all new Series 2 Master Station and Master Station Extender unit inherit the sturdiness and excellent build quality of the original Tecpro designs, incorporated into a space saving 1U format. Despite the reduced size, several new features have been added that address common installation and operational issues.

• 

  ME742 Master Station Extender

  When the ME742 is combined with the master station, the ME742 extender unit adds an extra two channels, C and D. These are technically identical to A and B and may be used independently or linked as required. In total, between 1 and 4 intercom circuits may be configured.

• 

  ME745 Master Station

  Developed from the UK's most successful wired intercom system, the all new Series 2 MS745 Master Station unit inherits the sturdiness and excellent build quality of the original Tecpro designs, incorporated into a space saving 1U format. Despite the reduced size, several new features have been added that address common installation and operational issues.

• 

  BP511 Beltpack

  The BP511 single circuit beltpack has 'Mic Select' switches linked in parallel. Pressing either switch will open or close the microphone circuit. The 'Mic Select' switches glow green when activated.

• 

  BP523 Beltpack

  The BP523 dual circuit beltpack has A and B 'Mic Select' switches. Pressing the respective switch will open or close that microphone circuit. The 'Mic Select' switches glow green when activated. Two volume controls are provided for monitoring via a pluggable headset.

• 

  BP525 Beltpack

  The BP525 dual circuit beltpack has A and B 'Mic Select' switches. Pressing the respective switch will open or close that microphone circuit. The 'Mic Select' switches glow green when activated. Two volume controls are provided for monitoring via a pluggable headset.

• 

  SMH214 Headset

  The SMH214 is a single muff, heavy duty closed-cup type with a moulded flexible boom arm housing an electret mic.

• 

  SMH210 Headsets

  Heavy duty single muff headset combination, robust moulded enclosed flexible mic boom. Earpiece impedance 1x400 ohms, (sensitivity 95dB for 0.548V input), frequency response 50-14400Hz.

• 

  DMH220 Headsets

  Heavy duty dual muff headset combination, robust moulded enclosed flexible mic boom. Earpiece impedance 2x400 ohms, (sensitivity 95dB for 0.548V input), frequency response 50-14400Hz.

• 

  DMH224 Headset

  The DMH224 is a dual muff, heavy duty closed-cup type with a moulded flexible boom arm housing an electret mic.

• 

  SMH310 Headsets

  New generation headset, developed from the long established SMH200 series. Specifically designed for professional use, both in communications systems and as an on-air commentator or reporter headset.

• 

  DMH320

  New generation headset, developed from the long established DMH200 series. Specifically designed for professional use, both in communications systems and as an on-air commentator or reporter headset.

• 

  TW406 Headset

  The TW406 has a lightweight single earpiece with integrated flexible electret boom microphone dedicated for use with the TW401 wireless beltback.

• 

  TW407 Headset

  The TW407 is similar to the TW406, but has an in-line on/off switch fitted to the cable.

• 

  LS Series Paging Loudspeaker Stations

  The LS200, 400 and 600 series of paging loudspeaker stations bring paging or listen-only capability to the Tecpro Communications System. They permit the construction of systems where paging can be added for just the cost of the LS units.

• 

  LS300 Series Talkback Loudspeaker Stations

  The LS300 Series Talkback Loudspeaker Outstations are designed to cover a wide range of applications at modest price. They can be used in a push-to-talk mode with the built-in microphone, or fitted with a plug-in gooseneck microphone for hands-free duplex communications.

• 

  PS713 Battery Power Supply

  The PS713 is a simple portable power supply interface which serves as the system master in mobile situations. It interfaces to an external DC supply in the range 12 to 30 volts (max) and contains a circuit breaker of 1 amp rating. The unit provides one comms circuit with three sockets. These are connected to Tecpro outstations in the normal way.

• 

  PS751 & PS753 Power Supply

  Tecpro Series 2 Power Supplies provide 24V DC to power small to medium sized intercom systems while terminating the audio lines with the correct impedance, enabling full duplex (simultaneous, two way) conversations to take place over extended cable runs.

• 

  PS752 Power Booster

  The Tecpro Series 2 PB752 Power Booster provides a simple method of supplementing the 24V DC system power within existing Intercom systems of any size when there is insufficient drive current available.

• 

  AD903 Auxiliary Input and Output Adaptor

  The AD903 2 to 4 wire adapter allows connection of almost any audio source to a Tecpro ring intercom 2 wire system. For example, most broadcast video cameras have in-built 4 wire comms systems which are cabled within the main video cable.

• 

  SL909 Xenon Strobe Lamp

  This unit can be connected at any point in a ring, and when a signal light is sensed, will produce high power flashes at approximately 1 per second from a xenon beacon.

• 

  LI906 Line Isolator

  The L1906 is similar to the SB901 in function, but serves only to form an independent remote circuit.

• 

  HH5 Handsets

  The HH5 handset is a 'fist' type microphone for use in noisy environments. Supplied complete with wall hanging bracket and fitted XLR 4 pin connector.

• 

  HS591 Handsets

  The Tecpro HS591 handset is designed to provide clear, intelligible communication in situations where a standard beltpack and headset would be inconvenient

• 

  Wall Mount Connector Plates

  Wallmount connector plates specifically for use with the Tecpro intercom system. These are designed to specification BS1363, the British standard for electrical connection accessories, so they fit onto standard electrical flush wallboxes (35mm depth type).

• 

  BP111 Beltpack

  The BP111 is a tough, light-weight beltpack suitable for use on the belt, free standing or on a wall. It has been designed to withstand portable use where care is not always taken by the user.

• 

  BP112 / 113 Beltpack

  The BP112 and BP113 dual circuit headset outstations are very similar to the well proven BP111 single circuit unit, and use the same electronics and controls. However a recessed toggle switch is provided in the top panel of the unit to enable users to select either channel A or channel B operation.

• 

  BP114 / 115 Beltpack

  The BP114 and BP115 dual circuit headset outstations offer full simultaneous dual channel communications. Audio from both rings is mixed in whatever ratio the user requires, and fed to both earpieces of dual muff headsets, or to the single earpiece on the single muff units. Speech and signalling to each circuit is available to either or both simultaneously as required.

• 

  BP116 / 117 Beltpack

  The BP116 and BP117 dual circuit headset outstations offer full simultaneous dual channel communications. Audio from each ring is fed separately to each earpiece. Many users find it easier to follow two different sound sources when they are fed separately to each ear - a system often known as 'split feed'. Speech and signalling to each circuit is available to either or both simultaneously.

• 

  SMH130 Headset

  Single muff with boom. Lightweight design for those users who do not need acoustic isolation .