PRODUCTS
Quick Find:
BP114 and 115
Beltpack Headset Outstations
The BP114 and BP115 dual circuit headset outstations offer full simultaneous dual channel communications. Audio from both rings is mixed in whatever ratio the user requires, and fed to both earpieces of dual muff headsets, or to the single earpiece on the single muff units. Speech and signalling to each circuit is available to either or both simultaneously as required.
Note that if they are used on single circuit systems, the second (unused) circuit connection needs to be terminated. (An LI906 will provide this termination).
Features (Dual circuit monaural)
Item BP114 is now DISCONTINUED and has been replaced with item BP523
Item BP115 is now DISCONTINUED and has been replaced with item BP525
- Simultaneous communication on two circuits
- Independent volume controls for each circuit
- Both channels mixed to headset earpiece(s)
- Speak to either or both circuits
- Signal (flash) onto either or both circuits
- Superbright LED Flash indicator shows which channel is calling
- Two XLR 3 pin female connectors for separate circuit connections on BP114
- XLR 6 pin connectors for single cable connection on BP115
Specs
| Power requirements | 24/30V DC, 10mA quiescent. 40mA max with Signal lamp on |
| Headphone output | Suits 8 ohm to 4k ohm headphones. |
| Microphone input | Suits 200 ohm to 600 ohm dynamic microphones. |
| Sidetone rejection | Up to 45dB. |
| Connector | XLR 3 pin male and female - system loop through XLR 4 pin male for headset. |
| Dimensions | 107 x93 x50mm. |
| Weight | 400g |
| Construction | Black anodised extruded case with glass-filled nylon bezels for protection. |
